30 de setembro de 2022 15:06:10 ART
Natural
leather is an organic material. A laser beam does not affect the leather itself but substances, tannins and dye staff, that it is cured with. The better the pretreatment, the better will be the result obtained with the
laser machine.
Quality of
engraving and cutting of leather is also determined by how properly the parameters of power and speed are set up. If the settings are not correct, leather can flame up or shrivel. The quality of processing on the laser machine affects how long the result remains intact.
Faux leather engraving and cutting
Faux leather can be cut and engraved on the laser machine. However, it is not recommended to perform deep engraving. When the depth is too big, the material starts to fringe, crumble, and its particles come off. Even if the product looks nice immediately after the treatment, it will wear out quickly.
When choosing parameters for engraving on faux leather, it is recommended to make a sample item first. Set up the minimal power of the laser machine and gradually increase it until you get the desired result of engraving or cutting.
P.s. Do engraving on
CO2 laser machine
Este post foi editado por Robbie Woods em 30 de setembro de 2022 15:06:57 ART"
Natural leather is an organic material. A laser beam does not affect the leather itself but substances, tannins and dye staff, that it is cured with. The better the pretreatment, the better will be the result obtained with the laser machine.
Quality of engraving and cutting of leather is also determined by how properly the parameters of power and speed are set up. If the settings are not correct, leather can flame up or shrivel. The quality of processing on the laser machine affects how long the result remains intact.
Faux leather engraving and cutting
Faux leather can be cut and engraved on the laser machine. However, it is not recommended to perform deep engraving. When the depth is too big, the material starts to fringe, crumble, and its particles come off. Even if the product looks nice immediately after the treatment, it will wear out quickly.
When choosing parameters for engraving on faux leather, it is recommended to make a sample item first. Set up the minimal power of the laser machine and gradually increase it until you get the desired result of engraving or cutting.
P.s. Do engraving on CO2 laser machine 
