To properly cut leather on a CNC CO2 laser machine, follow these instructions:
1. Prepare the leather for cutting by stretching it on a flat surface and securing it around the edges to keep it taut.
2. Set up the leather cutting software, adjusting it to the desired settings for your particular leather type, thickness, and size.
3. Choose the right tool for cutting leather on the CNC laser machine. Some machines have special knives and others have laser heads.
4. Check the machine settings, making sure they match the set parameters.
5. Start the program and wait for the machine to finish cutting the leather.
6. Inspect the cut material to make sure it has been cut correctly and without defects.
7. If necessary, repeat the cutting procedure to get the desired result.
8. When you are finished, turn off the machine, clean it and prepare it for the next cut.
It is important to remember that when working with leather on a CNC CO2 laser machine, it is necessary to observe safety rules, as well as to use protective glasses and hand protection.
